CMOMs ᱫᱚ ᱢᱤᱫ ᱢᱟᱥᱤᱱ ᱨᱮᱭᱟᱜ ᱠᱟᱹᱢᱤ ᱦᱚᱨᱟ ᱠᱟᱱᱟ ᱡᱟᱦᱟᱸ ᱫᱚ ᱠᱚᱢᱯᱭᱩᱴᱟᱨ ᱨᱮᱭᱟᱜ ᱠᱟᱹᱢᱤ ᱦᱚᱨᱟ ᱠᱚ ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱜᱩᱱ ᱩᱫᱩᱜ ᱮᱫᱟᱭ ᱚᱠᱟ ᱫᱚ ᱠᱟᱹᱢᱤ ᱦᱚᱨᱟ ᱨᱮ ᱵᱮᱵᱷᱟᱨᱚᱜ ᱠᱟᱱᱟ᱾
Using CAD models to generate G-code commands to drive milling cutters, turning tools, drills, etc. in high-speed rotation to remove a specific part of the material blank, and gradually shape the blank into a precision three-dimensional part. ᱱᱚᱶᱟ ᱴᱮᱠᱱᱚᱞᱚᱡᱤ ᱫᱚ ᱱᱟᱦᱟᱜ, ᱵᱮᱱᱟᱣ, ᱟᱨ ᱟᱹᱰᱤ ᱜᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ, ᱟᱨ ᱱᱚᱶᱟ ᱠᱚ ᱫᱚ ᱟᱹᱰᱤ ᱵᱮᱥ ᱜᱮᱭᱟ, ᱡᱟᱦᱟᱸ ᱫᱚ ᱰᱤᱡᱤᱴᱟᱞ ᱟᱨᱠᱴᱤᱠᱪᱟᱨ ᱨᱮ ᱟᱹᱰᱤ ᱜᱟᱱ ᱠᱟᱹᱢᱤ ᱠᱟᱱᱟ᱾
ᱫᱟᱜ ᱨᱮᱭᱟᱜ ᱵᱮᱵᱷᱟᱨ
ᱫᱟᱜ ᱡᱤᱱᱤᱥ ᱫᱚ ᱵᱟᱝ ᱵᱮᱥ ᱜᱮᱭᱟ ᱟᱨ ᱵᱟᱝ ᱮᱴᱟᱜ ᱮᱴᱟᱜ ᱡᱤᱱᱤᱥ ᱠᱚ ᱵᱤᱱᱟᱹ ᱫᱟᱜ ᱛᱮ ᱛᱮᱭᱟᱨᱚᱜ ᱠᱟᱱᱟ ᱾
ᱚᱱᱰᱮ } } } 1 ᱨᱩᱠᱷᱤᱭᱟᱹ
ᱢᱤᱫ Δml50 ᱡᱤᱱᱤᱥ ᱫᱚ ᱥᱟᱹᱨᱤ ᱟᱨ ᱵᱟᱹᱲᱛᱤ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱠᱚ ᱨᱮᱭᱟᱜ ᱯᱨᱚᱰᱚᱠᱥᱚᱱ ᱞᱳᱰᱤᱝ ᱨᱮ ᱮᱥᱮᱨ ᱮᱢᱟᱭᱟ ᱾
᱕-ᱢᱟᱭᱠᱨᱚᱥᱢᱤᱛ ᱠᱚ ᱢᱩᱫᱽ ᱨᱮ ᱾
ᱢᱤᱫ ᱢᱮᱴᱨᱤᱠᱥ } } } 17. ᱥᱴᱨᱤᱝ ᱥᱴᱨᱤᱝ ᱥᱴᱨᱤᱝ ᱫᱚ ᱥᱟᱹᱨᱤ ᱜᱮ ᱥᱴᱨᱤᱝ ᱥᱴᱨᱤᱝ ᱥᱟᱶ ᱡᱚᱯᱲᱟᱣ ᱢᱮ ᱡᱟᱦᱟᱸ ᱫᱚ ix.code.ca.co.
ᱯᱟᱨᱟᱢᱤᱴᱟᱨ
1980 ᱥᱟᱞᱦᱟ ᱨᱮ 2000 ᱠᱷᱚᱱ ᱵᱟᱹᱲᱛᱤ ᱢᱟᱨᱟᱝ ᱡᱤᱱᱤᱥ ᱠᱚ ᱢᱮᱱᱟᱜ-ᱟ, ᱡᱟᱦᱟᱸ ᱨᱮ ᱢᱤᱫ ᱢᱟᱨᱟᱝ ᱜᱩᱱᱟᱹᱱ ᱜᱩᱱ ᱠᱚ ᱢᱮᱱᱟᱜ-ᱟ ᱟᱨ ᱚᱱᱟ ᱨᱮᱭᱟᱜ ᱢᱤᱫ ᱥᱮᱬᱟ ᱦᱤᱥᱟᱹ ᱠᱟᱱᱟ ᱾ᱢᱤᱫ ᱢᱮᱴᱨᱤᱠᱥ } } } } ᱟᱞᱜᱟ ᱨᱚᱵᱚᱴ ᱑᱐᱐ ᱨᱮᱭᱟᱜ ᱜᱩᱱ ᱠᱟᱱᱟ ᱾.ᱟᱢ ᱫᱚ ᱟᱢ ᱨᱮᱱ ᱵᱮᱵᱷᱟᱨᱤᱭᱟᱹ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱟᱢᱟᱜ ᱦᱚᱲᱢᱚ ᱢᱚᱰᱮᱞ ᱨᱮ ᱫᱚᱦᱚ ᱦᱩᱭᱩᱜ ᱛᱟᱢᱟ, ᱟᱨ ᱮᱴᱟᱜ ᱠᱚ ᱫᱚ ᱓ᱰᱤ ᱯᱨᱚᱯᱷᱮᱥᱚᱱᱟᱞ ᱠᱚ ᱥᱟᱶ ᱢᱤᱫ ᱞᱮᱠᱟ ᱛᱮ ᱧᱮᱞ ᱦᱩᱭᱩᱜ ᱛᱟᱢᱟ᱾ ᱟᱵᱚᱣᱟᱜ ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ: ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ: ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ, ᱥᱴᱤᱞ, ᱥᱴᱤᱞ, ᱥᱞᱟᱠ, ᱥᱴᱤᱞ, ᱥᱞᱟᱠ, ᱞᱮᱡᱟᱨ, ᱞᱮᱡᱟᱨ, ᱥᱴᱤᱞ, ᱟᱨ ᱮᱴᱟᱜ ᱠᱚ, ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ᱾
|
ᱯᱟᱨᱟᱢᱤᱴᱟᱨ/ᱥᱤ ᱮᱢ |
ᱮᱞᱟᱨᱢ |
ᱢᱮᱠᱥᱣᱮᱞ |
ᱵᱟᱹᱲᱛᱤ |
ᱮᱨᱤᱡᱚᱱᱟ |
ᱵᱽᱨᱟᱣᱱ |
|
(ᱢᱮᱢ) |
1-100 |
1-100 |
1-120 |
1-120 |
1-100 |
|
ᱤᱞᱮᱠᱴᱨᱤᱠ ( |
0.5-5x105 |
0.5-5x105 |
0.5-5x105 |
0.5-5x105 |
0.5-5x105 |
|
ᱥᱤᱥᱴᱮᱢ |
ᱥᱮᱠᱨᱮᱴᱨᱤ |
ᱠᱟᱨ (᱑) ᱠᱮᱵᱤ |
ᱠᱚᱰᱮᱠᱥᱤᱵᱷᱤᱥᱤ+ᱰᱤ |
ᱠᱚᱰᱮᱠᱥ ᱥᱤᱰᱤ+ᱥᱤ |
ᱥᱤᱞᱤᱱᱰᱨᱤᱠᱟᱞ ᱰᱤ |
|
ᱠᱟᱹᱢᱤ ᱦᱚᱨᱟ |
ᱭᱩ/ᱰᱤᱥᱤᱥᱤ |
ᱤᱣᱮᱱᱴ |
} } } } ᱨᱩᱠᱷᱤᱭᱟᱹ ᱥᱚᱨᱥ ᱾ |
ᱤᱞᱤᱱᱚᱭᱤᱥ |
ᱰᱟᱠᱴᱚᱨ/ |
ᱯᱨᱚᱰᱟᱠᱴ ᱯᱨᱚᱥᱮᱥᱤᱝ
This step begins with importing the CAD model into the CAM software, where the system automatically analyzes the geometric features and generates optimized toolpaths, while setting parameters such as cutting speeds and feed rates, and finally outputting standard G-code instructions.
ᱟᱵᱚ ᱫᱚ ᱢᱤᱫ ᱥᱟᱶᱛᱮ ᱵᱮᱵᱚᱦᱟᱨ ᱟᱠᱟᱱ ᱠᱟᱹᱢᱤ ᱠᱚ ᱞᱟᱹᱜᱤᱫ ᱵᱮᱵᱚᱦᱟᱨ ᱟᱨ ᱵᱮᱵᱚᱦᱟᱨ ᱞᱟᱹᱜᱤᱫ ᱵᱮᱵᱚᱦᱟᱨᱚᱜ ᱠᱟᱱ ᱠᱟᱹᱢᱤ ᱠᱚ ᱵᱚᱱ ᱵᱮᱵᱷᱟᱨ ᱮᱫᱟ, ᱟᱨ ᱟᱵᱚ ᱫᱚ ᱢᱤᱫ ᱥᱟᱶᱛᱮ, ᱟᱨ applements shoption applemental .
CNC system needs to synchronize the control of 3-5 axes of motion, real-time adjustment of tool inclination to avoid interference, to achieve ± 0.01mm surface accuracy, the typical machining efficiency of three axes compared to the three-axis increase by three times, especially suitable for impeller, aerospace structural components and other complex geometries molding.
ᱱᱚᱶᱟ ᱠᱚ ᱢᱩᱫᱽ ᱨᱮ 100 mg, https://microsophims, Modersion appoption, ᱡᱟᱦᱟᱸ ᱫᱚ https://microsophime, Mable , ᱚᱱᱟ ᱛᱟᱭᱚᱢ, https:
ᱟᱵᱚᱣᱟᱜ ᱡᱤᱱᱤᱥ ᱠᱚ ᱨᱮ ᱥᱮᱞᱮᱫ ᱢᱮᱱᱟᱜᱼᱟ:
ᱱᱟᱦᱟᱜ:ᱠᱟᱨᱴᱨᱤᱡᱽ/ᱥᱤ ᱮᱞ ᱥᱤ/ᱥᱤ ᱮᱞ/ᱮᱞ ᱥᱴᱤᱞ-ᱞᱮᱵᱮᱞᱰ ᱥᱴᱤᱞ/ᱵᱟᱹᱲᱛᱤ ᱠᱟᱴ-ᱤᱱ-ᱮᱠᱥᱮᱞ, ᱮᱴᱟᱜ ᱥᱴᱤᱞ ᱾
ᱱᱟᱹᱢᱩ:// ᱵᱟᱨ/ᱵᱤᱴ/ᱵᱟᱹᱲᱛᱤ ᱵᱟᱨ/ᱵᱤᱴᱭ ᱵᱟᱱᱟᱨ ᱜᱮ ᱢᱤᱫ ᱥᱟᱶᱛᱮ ᱵᱟᱨ ᱫᱷᱟᱣ ᱠᱚ ᱵᱮᱵᱷᱟᱨ ᱮᱫᱟ ᱾